NEVER apply floor finish, scrub and recoat or deep strip your floors again!

Demo
Buckeye Reflections Wood Floor Program

Enviro-Solutions® Terrazzo/Concrete Floor Care Program

We can host a demonstration at your facility

60%
Reduce labour up to 60% over conventional methods!
3 simplified steps to ensure safer, cleaner and higher gloss concrete and terrazzo floors
  • Easy to understand training program with wall chart procedures
  • On site, responsive program specialists available upon request
  • Easy to use, safer, more cost effective and accurate dilution control dispensing/installation system available
  • Canadian manufacturer, innovative research and development along with quality control officers in house
60%
Step 1
One Time Only Preparation
60%
One Time Only Preparation
  • If your floor has been previously coated, deep strip (for the last time) using ES85 Scrub Free Stripper.
  • For best results dilute at 1:2 with cool water and follow label instructions.
  • Deep clean/rinse the floor using your auto scrubber and ES35 Restoration Cleaner at a 1:128 dilution with water, allow excess water to dry before proceeding to Step 2.
Step 2
Preparing Your Foundation
es35
ES35 RESTORATION CLEANER:
  • ES35-4 (4 x 3.78 L/case)
  • Dilution: 1:128
  • Product yields approx.
  • 12,000 sq. ft. per gallon
es36
ES36 DENSIFIER:
  • ES36-4 (4 x 3.78 L/case)
  • Dilution: 1:4
  • Product yields approx.
  • 2500 sq. ft. per gallon
Preparing Your Foundation
  • Install the appropriate ES-FPP pad to your floor scrubber (200 grit recommended as starting pad on most floors).
  • Using ES35 Restoration Cleaner at a 1:128 dilution with water, scrub the floor on maximum pressure. Scrub in a straight line across the area overlapping half of the scrub path on each turn. When the area is complete, scrub the area using the same motion in the opposite direction (see diagram).
  • Repeat the process with the 400 grit ES-FPP pad and remove excess water using the auto scrubber.
  • Dilute ES36 Nano Substrate Densifier 1:4 with water. Ensure the product is thoroughly mixed and place product into a pump sprayer.
  • Apply an even coat over the floor and use a clean flat mop to ensure no puddles or pools. Allow floor to dry completely (approx. 30-45 minutes).
  • Repeat the scrubbing process with the 800 grit ES-FPP
  • Conduct a final auto scrubber clean/rinse using ES37 Cleaner Maintainer Polisher at 1:128 dilution with water using either 800 or 1500 grit ES-CMP pad.
  • If additional gloss is desired dry burnish using the 1500 grit ES-FPP
FOUNDATION PREP PADS:
200
400
800
1500
  • ES-FPP (5/case)
  • Sizes: 14” – 20”
  • Grits: 100, 200, 400, 800, 1500
  • 100 grit recovery process is available upon management approval
  • APPROX. SQ. FT. YIELD:
  • Grit 200: 30,000 sq. ft.
  • Grit 400: 60,000 sq. ft.
  • Grit 800: 100,000 sq. ft.
  • Grit 1500: 300,000 sq. ft.
First Pass
first
Second Pass
second

Scrubbing in this pattern ensures that every point on the floor is scrubbed twice on each pass, contacting all points on the floor 4 times in total.

Step 3
Maintenance
ES37-both-sizes
ES35 RESTORATION CLEANER:
  • ES35-4 (4 x 3.78 L/case)
  • Dilution: 1:128
  • Product yields approx.
  • 12,000 sq. ft. per gallon
Maintenance
  • Fill your auto scrubber with ES37 Cleaner Maintainer Polisher diluted at 1:128 with water.
  • Always use an ES-CMP grit pad with the same number or higher than what you have previously used. (e.g. If you have used a 1500 grit pad to clean or burnish your floor, use pads with at least 1500 grit or higher to maintain the appearance)
  • Clean your floors according to your normal schedule.
  • For maximum gloss the floor can be burnished initially using the 1500 ES-CMP or 1500 ES-FPP pads and then the 3000 grit ES-CMP pads. For best results use high speed and maximum pressure
  • Burnish as desired for a higher level of shine.
200
400
800
1500
  • CLEANER MAINTAINER PADS:
  • ES-CMP (5/case)
  • Sizes: 14” – 27”
  • Grits: 800, 1500, 3000
  • APPROX. SQ. FT. YIELD:
  • BURNISHING:
  • Grit 800: 375,000 sq. ft.
  • Grit 1500: 425,000 sq. ft.
  • Grit 3000: 525,000 sq. ft.
  • FPP Grit 1500: 300,000 sq. ft.
  • APPROX. SQ. FT. YIELD:
  • BAUTO SCRUBBING:
  • Grit 800: 350,000 sq. ft.
  • Grit 1500: 400,000 sq. ft.
  • Grit 3000: 500,000 sq. ft.

I was very pleased with the outcome of the Enviro-Solutions Terrazzo/Concrete Program and I can’t believe the ease of care and maintenance.

- Curtis McGee, London Catholic District School Board